The BMS Blivet TM The worlds leading "all in one" compact Package Sewage Treatment Plant.
A unique combination of 'lamella plate technology' and the 'BMS Aerotor' results in a single tank package of outstanding
performance and efficiency.
The BMS SLUDGEPAK
The perfect complement to the BMS Blivot or indeed any Sewage Treatment System. The BMS Sludgepak is the
world's first package sludge treatment system. It is unique in providing a viable on-site sludge sanitation system
for small to medium sized communities without the use of chemicals.
The BMS Biolat TM The BMS Biolat system treats effluent from single dwellings
in locations unsuitable for a septic tank system. The BMS Biolat treats all the waste water from a residence with
up to 5 bedrooms. As there are no moving parts it avoids the problems associated with pump systems.
The BMS Aerotor TM For over twelve years the BMS Aerator has proved to be the
most innovative solution to waste water treatment in over 250 locations worldwide. The Aerator provides a highly
efficient, low maintenance, prefabricated, aerobic treatment for small to medium community waste water applications.
It is especially suitable where existing equipment is present, e.g. Primary Settlement/Septic Tank.
The BMS Petroleum Interceptor TM
The Dangerous Substances Acts of 1972 and 1979 require that all
petroleum and oil distribution outlets, both retail and private, should incorporate an approved Petroleum/Oil Interceptor
in their drainage systems in order to prevent Hydrocarbon waste and from polluting water supplies or creating a
potential fire hazard.
The BMS GRP Grease Traps TM The discharge of grease into sewers can cause blockages in
pipes and hinder the performance of sewage treatment plants. Grease traps are required where fats and greases from
small and large catering facilities are discharged to the drainage system.
The BMS Filterceptors TM BMS have developed their new "Filterceptor" range
of separators in line with the proposed new CEN European Standard for light liquid separators. It doubles both
as an interceptor and separator of pollutants on the petrol station forecourt where there is significant risk of
petrol or oil spillage. The filterceptor is designed to contain the maximum contents of a spillage from a fuel
delivery tanker compartment.
The BMS By-pass Interceptor TM A requirement of full retention interceptors is that they
must have a large enough capacity to prevent pollutants being flushed through the unit during storm conditions.
For larger drainage areas such as parking lots, airports and industrial estates this results in a very large full
retention petrol interceptor which makes production, installation and handling more costly. A practical and economical
solution to this problem is the BMS By-Pass Interceptor range.
Manufactured in Longford, Ireland under ISO 9002 Accredited Standards
